Thermal Spray Wire

Thermal Spray Wires

Grade Name Dimensions(mm) Chemical Compositions Wire Type Propeties and Applicaions
KLR23022 Aluminum wire 1.2 - 3.2 Al 99.% Solid Wire Good electrical conductivity and heat resistance, good resistance to atmosheric corrosion, chemical corrosion, thermal corrosion and brine corrosion, and good electrical and thermal conductivity. Hardness: HRB 60-65. Melting point: 660 ℃.
KLR23023 Zinc wire 1.2 - 3.2 Zn 99.9% Solid Wire High thermal conductivity, used for RFI/EMI shielding, electrical resistor, carbon brush and decoration. Hardness: HRb 35-40. Melting point: 1080 ℃
KLR23024 Molybdenum wire 1.2 - 3.2 Mo 99.9% Solid Wire Good hardness and lubricity, used for synchronization ring, piston ring, shifting fork and cementation primer. Hardness: HRC 40-60. Working temperature up to 750 ℃
KLR23025 Stannum wire 1.2 - 3.2 Sn 99.9% Solid Wire Good solderability and low melting point. Protective coatings for food containers, cementation primer for glass and gypsum substrates, electronic contact weldable surface. Hardness: HRb 10-15. Working temperature up to 100 ℃。
KLR23026 Nickel wire 1.2 - 3.2 Ni 99.5% Solid Wire Used for restoring corrosion resistant parts, and for pump plungers, axles, sealing rings, sleeves and hydraulic pumps. Hardness: HRb 58-60. Working temperature up to 750 ℃
KLR23027 Silver wire 1.2 - 3.2 Ag 99.5% Solid Wire Used for FRI/EMI shielding, and sputtering target
KLR23017 Cu wire 1.2 - 3.2 Cu 99.8% Solid Wire  Argon arc welding, oxygen free copper solid wire
It is used for argon arc welding of red copper and welding of copper and steel, gray cast iron and nickel alloy with wall thickness greater than 3mm, especially suitable for large thickness welding parts.
KLR23019 Cu 10Al 1Fe 1.2 - 3.2 Cu 10Al 1Fe Solid Wire  Argon arc welding, aluminum bronze solid wire
Applied to aluminum bronze surfacing on steel, wear resistance, seawater corrosion resistance, used in shipbuilding, machinery manufacturing, instruments and machine pump manufacturing
KLR23020 Ni 5Al 1.2 - 3.2 Ni 5Al Solid Wire Arc spraying, primer solid wire, applied to arc spraying primer bonding layer
KLR23021 Ni 20Al 1.2 - 3.2 Ni 20Al Solid Wire
KLR23022 Inconel 625 1.2 - 3.2 Ni Cr  Mo Nb Solid Wire Used for repairing of INCO625 workpiece, and for high temperature resistance coating. working temperature up to 1000 ℃
KLR23023 Inconel 718 1.2 - 3.2 Ni Cr  Mo Nb Solid Wire Used for thermal protective coating for iron and steel parts, airplane exhaust pipe, flashboard, heat treatment furnace, pryometer tube, wire annealing pot, heat treatment cover, charcoal fir box. working temperature up to 900 ℃
KLR23095 Incoloy 825 1.2 - 3.2 Ni Fe Cr Mo Cu Solid Wire Widely used in a variety of industrial fields where the use temperature does not exceed 550 degrees Celsius.
1. Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
2. Heat exchangers for seawater cooling, piping systems for marine products, and piping for acidic gas environments.
3. Heat exchangers, evaporators, washing and impregnation tubes in phosphoric acid production, etc.
4. Air heat exchanger in petroleum refining
5.Food engineering
6.Chemical process
7.Flame retardant alloy for high pressure oxygen application
KLR23096 Monel 400 1.2 - 3.2 Ni  Cu Solid Wire 1. Pulp and paper industry, such as boil-off and bleaching vessels.
2. Scrubber towers, reheaters, wet vapor fans in FGD systems, etc.
3. Equipment and components operating in acid gas environments; and
4. Reactors for acetic acid and acid products
5. Sulfuric acid condensers
6. Methylenediphenyl isocyanate (MDI)
7. Production and processing of impure phosphoric acid
KLR23097 ERNiCrMo-10 1.2 - 3.2 Ni Cr Mo W Co Solid Wire For welding of similar nickel-based alloys, e.g. UNS N06022 alloy
KLR23098 ERNiCrMo-13 1.2 - 3.2 Ni Cr Mo  Solid Wire For welding of UNS N06059 and dissimilar steels, can be used for surface overlay welding.
KLR23099 ERNiCrMo-4 1.2 - 3.2 Ni Cr Fe Mo W Solid Wire For welding of similar nickel-based alloys, such as UNS N10276 alloy and surface overlay welding.
KLR23100 ERNiCr-3 1.2 - 3.2 Ni Cr Nb Mn Fe Solid Wire For welding of nickel-chromium-iron alloys as well as dissimilar steels, e.g. UNS N06600.
KLR23101 ERNiCu-7 1.2 - 3.2 Ni Cu Solid Wire For welding of nickel-chromium-iron alloys as well as dissimilar steels, e.g. UNS N06600.
KLR23102 ER2209 1.2 - 3.2 Fe Ni Mo Solid Wire Alloy ER 2209 is designed to weld duplex stainless steels such as 2205 (UNS Number N31803). High tensile strength and improved resistance to stress corrosion cracking and pitting characterize the welds of this wire. This wire is lower in ferrite compared to that of base metal in order to obtain improved weldability
KLR23103 ER2594 1.2 - 3.2 Fe Cr Ni Mo Solid Wire MIDALLOY ER2594 is utilized to weld super duplex stainless such as SAF 2507 (UNS 32750) and other 25%
Chromium duplex stainless steels (i.e. UNS 32760, UNS 32550, and UNS 31260).
• MIDALLOY ER2594 is also utilized for corrosion resistance overlays. 
KLR23024 Hastelloy C 276 1.2 - 3.2 Ni Cr Mo Fe W Solid Wire Used for chemical refining and manufacturing industry, pump blocks, valve pieces, paper making indstry, guiding rolls. working temperature up to 970 ℃
KLR23104 Hastelloy X 1.2 - 3.2 Ni Cr Fe Mo Solid Wire The cooling rate in the quenching process of finished Hastelloy-X alloys is one of the most important factors affecting the alloying process, and rapid cooling can control the precipitation of Brittle carbide films at grain boundaries. The alloy is also susceptible to the formation of carbide films at grain boundaries when the solid solution temperature is higher than 1175° C. The alloy is also susceptible to the formation of carbide films at grain boundaries. The alloy shows a certain degree of age-hardening phenomenon after long-term aging, so that the plasticity decreases, and high-temperature strength is also reduced.
KLR23105 Tafa 95 1.2 - 3.2 Fe Cr B Si Mn Flux cored wire Boiler Tubes & Tube Shields,Yankee Dryer Rolls ,Anti-Skid ,Fan Blades ,Drill Collars.
KLR23106 Tafa 97 1.2 - 3.2 Fe WC Tic Ni B Si Flux cored wire Abrasion and wear resistant,High bond strength,Non-skid surface
KLR23107 308L 1.2 - 3.2 Fe Cr Ni Solid wire & Flux cored wire Used for petrochemical equipment and pressure vessels with corrosion-resistant stainless steel welding, such as 00Cr19Ni9.00Cr19Ni9Ti stainless steel welding for pressure vessel inner wall corrosion-resistant layer welding.
KLR23108 309L 1.2 - 3.2 Fe Cr Ni Solid wire & Flux cored wire Used for the same type of stainless steel coal joints as well as composite steel and dissimilar steel coal joints, can be used for nuclear reactor pressure vessel wall transition layer surfacing and welding of internal components.
KLR23109 316L 1.2 - 3.2 Fe Cr Ni Mo Solid wire & Flux cored wire Welding urea, synthetic fiber and other equipment and the same type of stainless steel structure, can be used for post-weld can not be heat-treated chromium stainless steel and composite steel and dissimilar steel welding.
KLR23110 347 1.2 - 3.2 Fe Cr Ni Solid wire & Flux cored wire For petrochemical equipment and pressure vessels with corrosion-resistant stainless steel welding, such as 18Cr-8Ni-NbNb stainless steel (SUS347), 18Cr-8Ni-Ti stainless steel (SUS321) welding.
KLR23111 420 1.2 - 3.2 Fe Cr Solid wire & Flux cored wire 420 is similar to 410 except with a higher carbon and chromium content ;this alloy may be used for welding of 403,405,410,416,420 and carbon steel overlay. 
KLR23112 430 1.2 - 3.2 Fe Cr Solid wire & Flux cored wire Containing chromium 17% ferritic stainless steel wire, with good high temperature corrosion resistance. Oxidation-resistant temperature up to 900 degrees, especially in the presence of soot produced by sulfide combustion, continuous casting roll transition material.
KLR23113 414N 1.2 - 3.2 Fe Ni Solid wire & Flux cored wire Fluorine-containing martensitic stainless steel alloy wire with corrosion, wear and thermal shock resistance. Ideal material for continuous casting roll surfacing.